View VNB28N04_8827413.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

vnp28n04fi VNB28N04/vnv28n04 oomnifeto: fully autoprotected power mosfet block diagram ( * ) type v clamp r ds(on) i lim vnp28n04fi VNB28N04 vnv28n04 42 v 42 v 42 v 0.035 w 0.035 w 0.035 w 28 a 28 a 28 a n linear current limitation n thermal shut down n short circuit protection n integrated clamp n low current drawn from input pin n diagnostic feedback through input pin n esd protection n direct access to the gate of the power mosfet (analog driving) n compatible with standard power mosfet description the vnp28n04fi, VNB28N04 and vnv28n04 are monolithic devices made using stmicroelectronics vipower m0 technology, intended for replacement of standard power mosfets in dc to 50 khz applications. built-in thermal shut-down, linear current limitation and overvoltage clamp protect the chip in harsh enviroments. fault feedback can be detected by monitoring the voltage at the input pin. 1 10 powerso-10 1 2 3 1 3 d2pak to-263 isowatt220 ? 1/13 (*) powerso-10 pin configuration : input = 6,7,8,9,10; source = 1,2,4,5; drain = tab september 2013 docid1645 rev 4 obsolete product(s) - obsolete product(s)
absolute maximum rating symbol parameter value unit powerso-10 d2pak isowatt220 v ds drain-source voltage (v in = 0) internally clamped v v in input voltage 18 v i d drain current internally limited a i r reverse dc output current -28 a v esd electrostatic discharge (c= 100 pf, r=1.5 k w ) 2000 v p tot total dissipation at t c =25 o c8334w t j operating junction temperature internally limited o c t c case operating t emperature internally limited o c t st g storage temperature -55 to 150 o c thermal data isowatt220 powerso-10 d2pak r thj-case r thj-amb thermal resistance junction-case max thermal resistance junction-ambient max 3.75 62.5 1.5 50 1.5 62.5 o c/w o c/w electrical characteristics (-40 < t j < 125 o c unless otherwise specified) off symbol parameter test conditions min. typ. max. unit v clamp drain-source clamp voltage i d = 200 ma v in = 0 34 42 51 v v cl th drain-source clamp threshold voltage i d =2ma v in =0 31 v v incl input-source reverse clamp voltage i in = -1 ma -1.1 -0.1 v i dss zero input voltage drain current (v in =0) v ds =13v v in =0 v ds =25v v in =0 100 200 m a m a i iss supply current from input pin v ds =0v v in = 10 v 250 600 m a on ( * ) symbol parameter test conditions min. typ. max. unit v in(th) input threshold voltage v ds =v in i d +ii n =1ma 0.8 3 v r ds(on) static drain-source on resistance v in =10v i d =14a v in =5v i d =14a -40 < t j <25 o c v in =10v i d =14a v in =5v i d =14a t j = 125 o c 0.035 0.05 0.07 0.1 w w w w vnp28n04fi-VNB28N04-vnv28n04 2/13 obsolete product(s) - obsolete product(s)
electrical characteristics (continued) dynamic symbol parameter test conditions min. typ. max. unit g fs ( * )forward transconductance v ds =13v i d =14a 9 18 s c oss output capacitance v ds =13v f=1mhz v in = 0 700 1100 pf switching (**) symbol parameter test conditions min. typ. max. unit t d(on) t r t d(off) t f turn-on delay time rise time turn-off delay time fall time v dd =15v i d =14a v gen =10v r gen =10 w (see figure 3) 100 330 400 155 300 800 900 400 ns ns ns ns t d(on) t r t d(off) t f turn-on delay time rise time turn-off delay time fall time v dd =15v i d =14a v gen =10v r gen = 1000 w (see figure 3) 450 1.7 7.5 3.4 900 4 25 10 ns m s m s m s (di/dt) on turn-on current slope v dd =15v i d =14a v in =10v r gen =10 w 35 a/ m s q i total input charge v dd =12v i d =10a v in = 10 v 60 nc source drain diode symbol parameter test conditions min. typ. max. unit v sd ( * )forwardonvoltage i sd =14a v in =0 2 v t rr ( ** ) q rr ( ** ) i rrm ( ** ) reverse recovery time reverse recovery charge reverse recovery current i sd = 14 a di/dt = 100 a/ m s v dd =30v t j =25 o c (see test circuit, figure 5) 180 0.45 7 ns m c a protection symbol parameter test conditions min. typ. max. unit i lim drain current limit v in =10v v ds =13v v in =5v v ds =13v 19 19 28 28 41 41 a a t dlim ( ** ) step response current limit v in =10v v in =5v 25 70 40 120 m s m s t jsh ( ** ) overtemperature shutdown 150 o c t jrs ( ** ) overtemperature reset 135 o c i gf ( ** ) fault sink current v in =10v v ds =13v v in =5v v ds =13v 50 20 ma ma e as ( ** ) single pulse avalanche energy starting t j =25 o cv dd =20v v in =10v r gen =1k w l=10mh 2.5 j ( * ) pulsed: pulse duration = 300 m s, duty cycle 1.5 % ( ** ) parameters guaranteed by design/characterization vnp28n04fi-VNB28N04-vnv28n04 3/13 obsolete product(s) - obsolete product(s)
during normal operation, the input pin is electrically connected to the gate of the internal power mosfet. the device then behaves like a standard power mosfet and can be used as a switch from dc to 50 khz. the only difference from the user's standpoint is that a small dc current (i iss ) flows into the input pin in order to supply the internal circuitry. the device integrates: - overvoltage clamp protection: internally set at 42v, along with the rugged avalanche characteristics of the power mosfet stage give this device unrivalled ruggedness and energy handling capability. this feature is mainly important when driving inductive loads. - linear current limiter circuit: limits the drain current id to ilim whatever the input pin voltage. when the current limiter is active, the device operates in the linear region, so power dissipation may exceed the capability of the heatsink. both case and junction temperatures increase, and if this phase lasts long enough, junction temperature may reach the overtemperature threshold t jsh . - overtemperature and short circuit protection: these are based on sensing the chip temperature and are not dependent on the input voltage. the location of the sensing element on the chip in the power stage area ensures fast, accurate detection of the junction temperature. overtemperature cutout occurs at minimum 150 o c. the device is automatically restarted when the chip temperature falls below 135 o c. - status feedback: in the case of an overtemperature fault condition, a status feedback is provided through the input pin. the internal protection circuit disconnects the input from the gate and connects it instead to ground via an equivalent resistance of 100 w . the failure can be detected by monitoring the voltage at the input pin, which will be close to ground potential. additional features of this device are esd protection according to the human body model and the ability to be driven from a ttl logic circuit (with a small increase in r ds(on) ). protection features vnp28n04fi-VNB28N04-vnv28n04 4/13 obsolete product(s) - obsolete product(s)
thermal impedance for isowatt220 derating curve transconductance thermal impedance for d2pak / powerso-10 output characteristics static drain-source on resistance vs input voltage vnp28n04fi-VNB28N04-vnv28n04 5/13 obsolete product(s) - obsolete product(s)
static drain-source on resistance input charge vs input voltage normalized input threshold voltage vs temperature static drain-source on resistance capacitance variations normalized on resistance vs temperature vnp28n04fi-VNB28N04-vnv28n04 6/13 obsolete product(s) - obsolete product(s)
normalized on resistance vs temperature turn-on current slope turn-off drain-source voltage slope turn-on current slope turn-off drain-source voltage slope switching time resistive load vnp28n04fi-VNB28N04-vnv28n04 7/13 obsolete product(s) - obsolete product(s)
switching time resistive load current limit vs junction temperature source drain diode forward characteristics switching time resistive load step response current limit vnp28n04fi-VNB28N04-vnv28n04 8/13 obsolete product(s) - obsolete product(s)
fig. 2: unclamped inductive waveforms fig. 3: switching times test circuits for resistive load fig. 4: input charge test circuit fig. 1: unclamped inductive load test circuits fig. 5: test circuit for inductive load switching and diode recovery times fig. 6: waveforms vnp28n04fi-VNB28N04-vnv28n04 9/13 obsolete product(s) - obsolete product(s)
dim. mm inch min. typ. max. min. typ. max. a 4.4 4.6 0.173 0.181 b 2.5 2.7 0.098 0.106 d 2.5 2.75 0.098 0.108 e 0.4 0.7 0.015 0.027 f 0.75 1 0.030 0.039 f1 1.15 1.7 0.045 0.067 f2 1.15 1.7 0.045 0.067 g 4.95 5.2 0.195 0.204 g1 2.4 2.7 0.094 0.106 h 10 10.4 0.393 0.409 l2 16 0.630 l3 28.6 30.6 1.126 1.204 l4 9.8 10.6 0.385 0.417 l6 15.9 16.4 0.626 0.645 l7 9 9.3 0.354 0.366 3 3.2 0.118 0.126 l2 a b d e h g l6 ? f l3 g1 123 f2 f1 l7 l4 isowatt220 mechanical data p011g vnp28n04fi-VNB28N04-vnv28n04 10/13 obsolete product(s) - obsolete product(s)
dim. mm inch min. typ. max. min. typ. max. a 4.3 4.6 0.169 0.181 a1 2.49 2.69 0.098 0.106 b 0.7 0.93 0.027 0.036 b2 1.25 1.4 0.049 0.055 c 0.45 0.6 0.017 0.023 c2 1.21 1.36 0.047 0.053 d 8.95 9.35 0.352 0.368 e 10 10.28 0.393 0.404 g 4.88 5.28 0.192 0.208 l 15 15.85 0.590 0.624 l2 1.27 1.4 0.050 0.055 l3 1.4 1.75 0.055 0.068 l2 l3 l b2 b g e a c2 d c a1 p011p6/c to-263 (d2pak) mechanical data vnp28n04fi-VNB28N04-vnv28n04 11/13 obsolete product(s) - obsolete product(s)
dim. mm inch min. typ. max. min. typ. max. a 3.35 3.65 0.132 0.144 a1 0.00 0.10 0.000 0.004 b 0.40 0.60 0.016 0.024 c 0.35 0.55 0.013 0.022 d 9.40 9.60 0.370 0.378 d1 7.40 7.60 0.291 0.300 e 9.30 9.50 0.366 0.374 e1 7.20 7.40 0.283 0.291 e2 7.20 7.60 0.283 0.300 e3 6.10 6.35 0.240 0.250 e4 5.90 6.10 0.232 0.240 e 1.27 0.050 f 1.25 1.35 0.049 0.053 h 13.80 14.40 0.543 0.567 h 0.50 0.002 l 1.20 1.80 0.047 0.071 q 1.70 0.067 a 0 o 8 o detail oao plane seating a l a1 f a1 h a d d1 == == == e4 0.10 a e1 e3 c q a == b b detail oao seating plane == == e2 6 10 5 1 eb he m 0.25 == == 0068039-c powerso-10 mechanical data vnp28n04fi-VNB28N04-vnv28n04 12/13 obsolete product(s) - obsolete product(s)
vnp28n04fi-VNB28N04-vnv28n04 13/13 docid1645 rev 4 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. if any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems wi th product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com obsolete product(s) - obsolete product(s)

▲Up To Search▲

Price & Availability of VNB28N04

	To Download VNB28N04 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .